If you know how to use computer speakers as a microphone, it can be an extremely useful tool in your audio mixing and preparation. Maintaining a consistent audio signal is vital if you are planning on performing live.
It is also imperative that you have a way to transmit that signal to your audience without them having to wear earphones.
You will find a variety of different technologies on the market for microphones and computer speakers, so knowing which one will work best for your needs is dependent upon the circumstances.
Most computer speakers have a diaphragm attached to the bottom, or the speaker itself. When you adjust the diaphragm to the up and down controls, you adjust the angle of the microphone.
You can change the level of the sound produced by the diaphragm by loosening the screws on the bottom of the unit. You can hold the microphone between your finger and thumb and slide it until it clicks with your finger, this is the tightest setting.
What to consider when using a computer speaker
If you are using a computer speaker that has a lot of bass, you will want to make sure that the diaphragm is not at an angle that will cause additional echo.
If the angle is too large, you will get a muffled sound. You should always aim the microphone at your audience while you are adjusting the diaphragm for the appropriate sound.
With a desktop microphone, the diaphragm is mounted to a flexible pole that extends from the front of the speaker. The microphone is connected to that flexible pole with a cable.
There may be a switch or other hardware that controls the volume of the sound produced. Many computer speakers will allow you to select different configurations, which will increase your versatility when working.
If you are working with a microphone that does not have a diaphragm attached to it, you will need some additional equipment in order to have the proper sound. Since the sound will be coming from your mouth and ears, you will want to protect your ears by using earplugs or a helmet.
An excellent way to protect your head is to use a headset. Headphones will muffle the sound so you can listen without turning your head.
If there is no headphone port on your computer system, you can use a pair of earbuds. Place them behind your ear and press them firmly against your ears.
Some sound systems come with a compressor. You can use the compressor to increase the volume of any song you are playing. However, many times the compressor is set up incorrectly and may result in distorted sounds or an overly bright sound.
In order to set up the compressor correctly, you must refer to the owner’s manual of your sound system. It is important that the volume control is set to the appropriate level.
Many computer systems also have what are called virtual diaphragms. These are specially designed microphones that will replicate the sound of a human diaphragm.
You can experiment with this type of microphone by using another source of sound, such as a CD or other audio device. Set the diaphragm unit to the appropriate level and experiment with the sound that comes through.
It really doesn’t matter which way you experiment with computer speakers. As long as you get great results, you have learned how to use a microphone correctly.
By using professional-quality sound systems and headphones, you can create your own unique sound experience.
Can you use a microphone with an iPod?
Another common question is how you can use a microphone with an iPod, or with computers that do not have sound cards. The simple answer is that you can’t.
The signal will simply be lost if you have both a microphone and an iPod. There are new wireless microphone options available, however. These will let you use your computer speaker with an iPod or your iPod with your computer.
There are many great new lightweight microphone options that are very effective. Many of these are wireless and will work well with your computer as well. Just make sure that the sound card that is used in your computer has enough power to handle the sound that is being generated.
Many of these lightweight options will not generate much vibration. They will give you a good quality sound experience, but they won’t interfere with the quality of the speakers that you are using.
It may seem like a simple question, but many people don’t quite understand how to use computer speakers as a microphone. Even though a traditional microphone has a diaphragm attached to it, many people wonder how it works.
Most computers will have a port that is designed like a microphone jack. This port can be plugged into any compatible sound card to give you a quality recording device. All you need to do is read the manual that came with your sound card and you should be set.
Do computer speakers have microphones?
If you are like many people, you have been asking yourself “Do computer speakers have microphones?” If so, your answer may surprise you. Traditionally, a microphone was used by musicians to record their guitar parts for future rehearsal sessions or to write and record new songs.
Microphones have come a long way and are used in many different applications. Here are some reasons why you may need to purchase a computer with a microphone input.
Many computer desk computers come standard with a microphone input jack. This allows you to use speakers and headphones to listen to your music from your computer without using a line input device that is connected to your computer via a USB port.
In addition, most computer desktops come standard with speakers that plug into the USB port as well. If you currently have a laptop, check to see if your laptop has a microphone input or not.
What about video game consoles?
Do game consoles have audio input devices as well? Most modern game consoles have both video game controls and audio output devices that allow you to hear and speak with other players while playing your favorite video game.
This makes using your head gear optional when you do not want to carry around extra controllers.
Do you work from home and take frequent dictation to your computer? Does your voice have to be electronically recorded so that it can be played back later? You may be able to buy computer software that will enable you to record your own voice so that you can play it back at any time.
However, if your voice is not strong enough for this type of software, you may find it necessary to invest in a headset to get your own personal dictation device.
There are also many computer speakers on the market today that will allow you to plug in your own microphone and speakers to make a clear and powerful audio input device.
Do video cameras have audio inputs?
Some cameras record the information directly to your hard drive where they reside. Others require an external hard drive or digital camera card to store the footage.
If you use a hand held video camera then no additional input devices are needed but if you use one of the more expensive professional models then microphones are necessary to make the sound recordings.
What if there is no microphone built into my computer system? Does this mean that I have to purchase one as part of the input devices that I have? Not necessarily.
In fact, it is often much more cost effective to purchase a wireless microphone as part of your input device than it would be to purchase a microphone separately.
Wireless microphones operate very quietly, making them perfect for situations where sound quality is critical such as meetings and the like.
Does my input device has a feature that lets me control which input devices I use at any given time? Some do. For example, some models allow you to control your computer speakers volume from within the speaker’s operating system itself.
Some systems let you control the input devices to your computer uses from within the operating system itself.
And some just let you use a single Control Panel window for controlling all the input devices to your computer uses. These features are often called “gaming profiles” by their manufacturers.
Do computers have audio inputs?
All in all, it appears that the typical computer setup today does not include any kind of microphone input devices. However, if you need to use a microphone for any reason then you can use software such as Cubase, ProTools or Sonar to manage your mike setup.
The advantage of these softwares is that they are easy to set up and don’t require any specialized technical skills.
They also have the added benefit of letting you keep all your input devices well organized and out of sight (out of the way where they don’t interfere with each other).
How to know if a computer has a microphone
Learning how to know if a computer has a microphone is not that difficult to answer. In fact, all you have to do is to go to your favorite search engine and type in the words microphone into the search bar.
You will be given hundreds of results, but how will you know which ones are the best to choose from?
There are a few things you can look for in order to determine whether or not your microphone is working properly. For instance, the first thing you should look for is the microphone icon on the desktop or menu.
If the microphone does not have an icon, it means that the microphone is not working. Next, you should check out the other hardware devices as well.
For instance, your computer might not have an optical audio input because it does not use sound waves in the first place.
Check for internal sound cards
If you have a sound card installed, then you should see an icon for the device. If you see any sort of letter or number, then this means that the microphone is recognized and is integrated with the computer.
Now, if you see only a name of the device, then it is likely that the microphone is not working because it was never enabled on the system.
Some computers have a built in microphone, while others require you to install external devices. In any case, if the microphone works with the operating system, then you are good to go.
The next thing you should check into is if your microphone captures sound waves. If you turn up the volume of your computer speaker, you should hear a sound. This will tell you that the microphone is working and recording audio.
However, if you cannot hear any sound coming out of the speaker, then there could be problems with the microphone. The microphone should capture all audio before making it to your computer.
Check the connection of the mic to your computer
When you have a microphone connected to your computer, then the microphone driver should be installed properly. This is only needed for microphones that are used for web cams or recorded videos.
However, some computer systems do not work well with microphone drivers being missing or outdated. To know if your microphone driver is working properly, you can check into the device manager to see which programs are listening to your microphone and capturing the sound waves.
If your microphone device is connected to your computer and you do not see any device in the list, then your microphone might have been accidentally removed. This can happen if you reinstall any programs or even if you delete some programs.
Another way how to know if a computer has a microphone is if it is powered off. When the computer powers down, it automatically removes all peripheral devices so make sure that your microphone is not connected to your computer when it is turned off.
If you have a computer with a sound card installed but no microphone, then your microphone probably has been configured but is not functional.
You can find your microphone drivers in the sound card driver control panel. Once you have updated your sound card drivers, you will be able to use the microphone again.
How to know if a computer has a microphone is very simple. All you need is a microphone that works properly and if you are having trouble, then you need to contact the manufacturer for help.
However, if you have a sound card and microphone connected to your computer, then you can determine if your microphone is working by clicking microphone button and listening to the sound.